/
AC/DC Power Supply
AC/DC Power Supply
- Kaitlin Luong
Owned by Kaitlin Luong
The CTM-500 can be powered using an AC/DC wall adapter when 110/120 Volt AC power is accessible. Simply connect the appropriate power source to the 4-pin locking connector marked with the power icon .
Modem configuration may be necessary to disable power management if continuous power is required for the CTM-500 without interruption.
AC Wall Adaptor Part Number:
Item | Part Number |
|---|---|
CTM-500 AC wall adaptor | 11220.2010 |
The CTM-ONE AC power adapter is NOT compatible and CANNOT BE USED with the CTM-500.
, multiple selections available,
Related content
Power Over Ethernet (PoE)
Power Over Ethernet (PoE)
More like this
DC Power Supply
DC Power Supply
More like this
Vehicle Diagnostic Port (OBDII/J1939)
Vehicle Diagnostic Port (OBDII/J1939)
Read with this
AC/DC Power Supply
AC/DC Power Supply
More like this
Hardware Overview
Hardware Overview
Read with this
Power Management
Power Management
More like this
Copyright © 2020 Cypress Solutions. All Rights Reserved