/
Vehicle Diagnostic Port (OBDII/J1939)
Vehicle Diagnostic Port (OBDII/J1939)
- Kaitlin Luong
- Matthew Murnaghan
Owned by Kaitlin Luong
For mobile applications, the CTM-500 can be powered using the available OBDII or J1939 interface.
Cable Part Numbers:
Length | J1939 Part Number | OBDII Part Number |
|---|---|---|
2m (6ft) | 6954.2002 | 6954.2001 |
4.5m (15 ft) | 6954.2029 | 6954.2028 |
6m (20 ft) | 6954.2044 |
|
Ignition Cable (optional)
Ignition cable is only required for vehicles that cannot determine the ignition state from the vehicle ECU. Please contact Cypress Solutions at support@cypress.bc.ca for additional information.
Length | Part Number |
|---|---|
4.5m (15 ft) | 6954.2052 |
, multiple selections available,
Related content
DC Power Supply
DC Power Supply
Read with this
Vehicle Diagnostic Port (OBDII/J1939)
Vehicle Diagnostic Port (OBDII/J1939)
More like this
User Manual
User Manual
Read with this
In-Vehicle
In-Vehicle
More like this
CTM-500 Configuration
CTM-500 Configuration
Read with this
Appendix 3: Power Connections for OBDII and J1939 Cables
Appendix 3: Power Connections for OBDII and J1939 Cables
More like this
Copyright © 2020 Cypress Solutions. All Rights Reserved