Physical Mounting

The CTM-500 includes a flexible, shock absorbing mounting bracket that has eight 5mm (3/16”) diameter mounting holes suitable for M5 or #10 screws.  

1. Use either the outer or inner 4-hole mounting pattern to secure the bracket. Take care not to over-tighten.

2. Clip the CTM-500 into the 4 tabs of the bracket.

The bracket can be used as drill template. This hole pattern matches the legacy Cypress Solutions devices (CTM-200 and Oxygen 3 Plus), therefore no extra holes are required.

Open

MOUNTING BRACKET

Open

MOUNTING BRACKET DRILLING HOLES

 The CTM-500 mounting bracket also has storage space for the SIM card removal tool, as shown below.

Open