Dashboards

System status

Default Dashboard showing general sub-categories

• General

• Connectivity summary

• Power

• Inputs

• Engine diagnostics

Cell status

Cellular network Parameters

• Account information

• Connectivity (detailed)

• Signal Information

Network status

Information on networking settings

• Network Interface status

  • wwan0

  • eth0

  • wlan0

  • wlan1

• Network routes

• ARP table

QoS status

Information on Quality of Service (if enabled)

Firewall status

• Firewall rules

• NAT table

• Mangle table

VPN status

Information on IPsec if enabled.

Log Viewer

Display of log data from 19 available categories

• Syslog

• Eventlog

• Driver ID

• Bluetooth and BLE

• CAN0 and CAN1

• Cellular connectivity

• GPIO, I2C, LED

• GPS, deadReckoning

• IPsec VPN

• Device firmware and config management

• MODBUS RS232/RS485

• Monitoring SNMP

• Network interfaces, WiFi, firewall, DDNS

• PAD RS232/RS485

• Power management watchdog

• Report delivery

• Report triggers

• System stats and data logger

• Wireless LAN

Installer

Displays information related to vehicle installation and commissioning

• Overview

• Stats

• Raw Vehicle CAN0/CAN1 data if available

• Set odometer value

• Set engine hours value

Diagnostics

Exposes common Linux commands for troubleshooting

• Ping

• Traceroute

• Name lookup

• Route lookup

• TCP dump

• Diagnostics output window