Power connector with ignition sense (4 pins)
7-32 VDC with transient (spike) protection
Typical current draw is 500mA @ 12V
Standby mode 10mA @ 12VDC
Dual RJ-45 Gigabit Ethernet Ports
ETH0 (Ethernet 0)
ETH1 (Ethernet 1)
Engine Diagnostic Port (ECU) (8 pins)
Dual CAN interface
supports OBDII and J1939 supported vehicles
General Purpose Input and Outputs (GPIO)/Serial/1-Wire® (16 pin). Please refer to Appendix 2: GPIO/RS232/1-Wire Data Cable Connection for more detail
Inputs x 4
Outputs x 4
R-S232 (Receive/Transmit)
1-Wire® interface
Protected (fused) power output
USB-C dual role port
Multiple RF connectors
Threaded SMA style for cellular GPS(GNSS)
4x antenna ports for cellullar
1 antenna port for GPS(GNSS)
RP-SMA style for Wi-Fi
2x antenna ports
ON/OFF Switch
The switch is used to turn the device on and off
Reset button
Used for rebooting or resetting the device to fail safe and factory configurations
Dual SIM card slot
Supports two 2FF (mini) SIM cards