Power connector with ignition sense (4 pins)

• 7-32 VDC with transient (spike) protection

• Typical current draw is 500mA @ 12V

• Standby mode 10mA @ 12VDC

Dual RJ-45 Gigabit Ethernet Ports

• ETH0 (Ethernet 0)

• ETH1 (Ethernet 1)

Engine Diagnostic Port (ECU) (8 pins)

• Dual CAN interface

• supports OBDII and J1939 supported vehicles

General Purpose Input and Outputs (GPIO)/Serial/1-Wire® (16 pin). Please refer to Appendix 2: GPIO/RS232/1-Wire Data Cable Connection for more detail

• Inputs x 4

• Outputs x 4

• R-S232 (Receive/Transmit)

• 1-Wire® interface

• Protected (fused) power output                                    

USB-C dual role port

Multiple RF connectors

• Threaded SMA style for cellular GPS(GNSS)

  • 4x antenna ports for cellullar

  • 1 antenna port for GPS(GNSS)

• RP-SMA style for Wi-Fi

  • 2x antenna ports

ON/OFF Switch

• The switch is used to turn the device on and off

Reset button

• Used for rebooting or resetting the device to fail safe and factory configurations

Dual SIM card slot

• Supports two 2FF (mini) SIM cards