There are two methods for controlling and configuring the CTM-ONE modem:
Local Access via web browser
Configuration of the CTM-ONE modem is achieved through a hierarchical web GUI interface. Cypress IOT provides the same hierarchical interface to replicate the experience of being locally connected to the device.
Local Access:
Connect locally to the modem via Ethernet cable or Wi-Fi.
Available when the modem does NOT have an active cellular connection or no SIM installed.
Local Access Prerequisites:
Physical access to the CTM-ONE device.
Modem must be configured to accept connections via local Ethernet or Wi-Fi.
The connecting computer must allow connections via the LAN/WLAN configuration on the modem.
Remote Access via Cypress
Devices regularly "check-in" to Cypress IOT at user-configurable time intervals, such as every 900 seconds or 15 minutes. Device management via Cypress IOT is a near real-time system for device management based on the programmed check-in time. After a device checks in to Cypress IOT, it will apply any configuration changes queued for the device via the configuration/command/jobs interface of Cypress IOT.
Remote Access Prerequisites:
Users must have active Cypress IOT credentials.
Modem must be able to communicate with Cypress IOT via cellular wireless connection.