Document toolboxDocument toolbox

Firmware Release

Owned by Kaitlin Luong
Last updated: May 17, 2024
3 min read

Version 1.5.6

Release Date

  • May 15, 2024

Features and Improvements

  • Added DHCP MAC Binding

  • Improved CTM-ONE LPM Power Consumption

Bug Fixes and Changes

  • Fixed a Validation Error on WLAN1 IP subnets

  • Fixed Local Serial Reports Display on GUI

  • Fixed required reboot to enable or disable local UDP or TCP reports

  • Fixed a bug causing Stale PGPS

  • Fixed a bug that makes IOT process stuck on fail

Download CTM-500 firmware v1.5.6 here.

Version 1.5.5

Release Date

  • Mar 29, 2024

Features and Improvements

  • Added LPM Message to Eventlog

  • Added support for SNMPv3

  • Improved Configuration Validator to Support Hardware Configuration

  • Added a Feature to Allow Device to Check to IOT When Device Time is 1970

  • Enabled STAGPS support for L26-ADR GPS Module on the CTM-500

  • Implemented Hosts File Management via device configuration

  • Implemented Feature to Restart GPS Process After Inactivity

Bug Fixes and Changes

  • Changed configuration validator to Only Allow Supported Keys to be sent to Cypress VUE/IOT

  • Fixed a Bug That Causes CELL_TOTAL_RX Values to Drop

  • Changed IOT Process to not Restart When Changing Configuration

  • Changed GUI Feedback When Changing OFIE Settings

  • Fixed DNAT Firewall Rules not being applied

  • Fixed Cached IMEI data on CTM-500

Download CTM-500 firmware v1.5.5 here.

Version 1.5.4

Release Date

  • Nov 30, 2023

Features and Improvements

  • QoS

  • Dual SIM Failover

  • Support for CTM Connect GATT Endpoint

  • LED flashing while booting

  • Calculation of GPS SQI

Bug Fixes and Changes

  • Improved resiliency of OTA FW Upgrades

  • CAN_STATUS key state not correct with CAN disabled

  • NET_ETH0_LINK key state not indicating Ethernet disconnected

  • Device not aborting LPM if ignition comes back

  • Setting interface metric for DHCP client interfaces

  • CTM-500 WIFI driver update

  • Automatic deletion of feature log files when disabling log in the configuration

  • Improper handling of DNS when switching SIM slots

  • Pass through static - Routing between devices on the same subnet

  • Spreader support updated to 1.7.1.fw - CIRUS material name fix

Version 1.5.3

Release Date

  • Sep 22, 2023

Features and Improvements

  • Added option to report packets in order

  • Added GATT Endpoints feature

  • SNMP v1 and v2

  • Diagnostics mode for CTM Connect

  • Bulk reporting to Cypress-IOT

  • Non password protected installer page

  • Added uBoot management utilities

  • Network diagnostics features in web GUI

  • Added Validator for 1.5.3 Downgrades to 1.5.X

Bug Fixes and Changes

  • Fixed BT startup issues on CTM-500

  • Fixed BT broadcast issues with GATT enabled

  • Removed support of the FC66EB module

  • Fixed Iptables rules not being applied after FW upgrade

  • CTM-500 showing internal antenna option for WiFi

  • Importing configuration causes issues with Radius authentication

  • Increase maximum number of supported WiFi clients for v4 hardware

  • Made secondary IP DHCP lease time configurable

  • Integrated IPSec with system logging

  • Beautified the installer page

  • Numerous improvements to Cypress-IOT job management

Version 1.5.1

Release Date

  • Jun 14, 2023

Hotfix

  • Fixed an issue with cypress-iot client not restarting after cell disconnects, causing IOT check-ins to stop

Version 1.5.0

Note: Downgrades from version 1.5.0 and above are not supported

Release Date

  • May 23, 2023

Features and Improvements

  • Added encryption of secure fields, such as passwords and secrets

  • Added ability to reset password to factory settings from GUI

  • Added an option to report only the changed keys in reports

  • Improved the CLI options to better display configurations and hierarchy

Bug Fixes and Changes

  • Fixed Radius fallback timeout causing slow GUI performance issue

  • Fixed ISP-provided DNS not working issue

  • Fixed NAT rules not applying immediately with config change issue

  • Fixed Custom Firewall rules requiring a restart issue

  • Fixed corner cases with CAN and Network data not displaying correctly in GUI

  • Fixed network watchdog not restarting with cell config changes issue

  • Improved WiFi functionality on CTM-500

  • Improved IoT jobs management

  • Improved validation for WiFi passwords

  • Improved power management

  • Standardized menu labels and titles across GUI

  • Disabled SSH access by default for enhanced security

Version 1.4.2

Release Date

  • Mar 30, 2023

Features and Improvements

  • Added apps management

  • Added WLAN bridge functionality

  • Added ability for CAN parameters to lock onto specific ECU address

  • Added remote logging

  • Added ability to see logs in GUI

  • Added button to send details to IoT for troubleshooting

  • Added support for array config management via CLI

  • Added dhcpdump utility to CLI

  • Matched iwconfig output between WG7831 and FC21

Bug Fixes and Changes

  • Fixed VLAN interfaces functionality

  • Fixed DHCP Relay functionality

  • Fixed Radius SSH authentication

  • Fixed firewall rules ordering issues

  • Fixed Passthrough static mode issues

  • Improved custom firewall rule management

  • Improved Radius error management in case of wrong configuration

  • Removed default route option from eth0/1 settings

  • Fixed spreader initialization issues

  • Fixed the reading of AIN values over MODBUS

  • Fixed no hysteresis issue on general-purpose inputs

  • Fixed CTM-ONE Power Consumption in LPM

  • Fixed the inability to disable IoT check-ins

  • Fixed minor SNF issues

  • [Other] Minor bug fixes

Version 1.4.1

Release Date

  • Feb 3, 2023

Features and Improvements

  • Added configuration migration from 1.3.x FW versions to 1.4.1

  • Added Device ID for reporting and management

  • Added spreader support to FW

  • Added CPE monitoring

  • Added Ping proxy feature

  • Added Import/Export device configuration feature via web GUI or command line

  • Added QXDM logging capability

  • Ported RSSIMON command from Oxygen 3

  • Improved web GUI

  • Improved local web GUI session management

  • Improved local password management

  • Improved CTM-500 LED status

  • Improved presentation of cellular information with LTE-A and 5G radios

  • Added deprecated ciphers for compatibility support

  • Added dual WiFi radio support for CTM-ONE

  • Added support for Quectel RM520N-GL 5G radio

  • Added support for Variscite v 3.1 SoM based on ADI Ethernet Phy

Bug Fixes

  • Fixed Passthrough mode issues with firewall settings

  • Fixed Static Routes not applied issue in Passthrough mode

  • Fixed Custom firewall rules lost after reboot

  • Fixed CTM-ONE LED indicators

  • Fixed CTM-500 WiFi Client + AP functionality

  • Fixed IPSec tunnel not starting up when enabled

  • Fixed FC21 radio management in LPM

  • Fixed failsafe configuration issues

  • Fixed GUI access with Radius Authentication

  • Fixed TAIP LN missing reserved 10 bytes

  • Fixed SNF Count issues

Copyright © 2020 Cypress Solutions. All Rights Reserved