Version 1.5.7

Release Date

• Sep 20, 2024

Features and Improvements

• Added oxycom2 script associated with the RS485 port

• Enabled access to device services when full GRE tunnels are configured

• Added WPA3-Personal support for the CTM-500

• Dead Reckoning feature on the CTM-500.

  • Note that this feature is BETA in this release

• GPS module FW upgrade for the CTM-500. Note that a specific FW is required for DR feature above

Bug Fixes and Changes

• Fixed frequent vuereport restarts

• Fixed factory reset operation with “staged” files present

• Increased number of slaves supported for MODBUS Master Gateway

• IPSec Config strings with white spaces are now rejected

Download CTM-500 firmware v1.5.7 here.

Version 1.5.6.1

Release Date

• Jul 9, 2024

Features and Improvements

• Improvements to IPSec IKEv1 proposal configuration to simplify handling of multiple AED proposals.

Bug Fixes and Changes

• Fixed frequent cell disconnect issue caused by statistics gathering process.

Download CTM-500 firmware v1.5.6.1 here.

Version 1.5.6

Release Date

• May 15, 2024

Features and Improvements

• Added DHCP MAC Binding

• Improved CTM-ONE LPM Power Consumption

Bug Fixes and Changes

• Fixed a Validation Error on WLAN1 IP subnets

• Fixed Local Serial Reports Display on GUI

• Fixed required reboot to enable or disable local UDP or TCP reports

• Fixed a bug causing Stale PGPS

• Fixed a bug that makes IOT process stuck on fail

Download CTM-500 firmware v1.5.6 here.

Version 1.5.5

Release Date

• Mar 29, 2024

Features and Improvements

• Added LPM Message to Eventlog

• Added support for SNMPv3

• Improved Configuration Validator to Support Hardware Configuration

• Added a Feature to Allow Device to Check to IOT When Device Time is 1970

• Enabled STAGPS support for L26-ADR GPS Module on the CTM-500

• Implemented Hosts File Management via device configuration

• Implemented Feature to Restart GPS Process After Inactivity

Bug Fixes and Changes

• Changed configuration validator to Only Allow Supported Keys to be sent to Cypress VUE/IOT

• Fixed a Bug That Causes CELL_TOTAL_RX Values to Drop

• Changed IOT Process to not Restart When Changing Configuration

• Changed GUI Feedback When Changing OFIE Settings

• Fixed DNAT Firewall Rules not being applied

• Fixed Cached IMEI data on CTM-500

Download CTM-500 firmware v1.5.5 here.

Version 1.5.4

Release Date

• Nov 30, 2023

Features and Improvements

• QoS

• Dual SIM Failover

• Support for CTM Connect GATT Endpoint

• LED flashing while booting

• Calculation of GPS SQI

Bug Fixes and Changes

• Improved resiliency of OTA FW Upgrades

• CAN_STATUS key state not correct with CAN disabled

• NET_ETH0_LINK key state not indicating Ethernet disconnected

• Device not aborting LPM if ignition comes back

• Setting interface metric for DHCP client interfaces

• CTM-500 WIFI driver update

• Automatic deletion of feature log files when disabling log in the configuration

• Improper handling of DNS when switching SIM slots

• Pass through static - Routing between devices on the same subnet

• Spreader support updated to 1.7.1.fw - CIRUS material name fix

Version 1.5.3

Release Date

• Sep 22, 2023

Features and Improvements

• Added option to report packets in order

• Added GATT Endpoints feature

• SNMP v1 and v2

• Diagnostics mode for CTM Connect

• Bulk reporting to Cypress-IOT

• Non password protected installer page

• Added uBoot management utilities

• Network diagnostics features in web GUI

• Added Validator for 1.5.3 Downgrades to 1.5.X

Bug Fixes and Changes

• Fixed BT startup issues on CTM-500

• Fixed BT broadcast issues with GATT enabled

• Removed support of the FC66EB module

• Fixed Iptables rules not being applied after FW upgrade

• CTM-500 showing internal antenna option for WiFi

• Importing configuration causes issues with Radius authentication

• Increase maximum number of supported WiFi clients for v4 hardware

• Made secondary IP DHCP lease time configurable

• Integrated IPSec with system logging

• Beautified the installer page

• Numerous improvements to Cypress-IOT job management

Version 1.5.1

Release Date

• Jun 14, 2023

Hotfix

• Fixed an issue with cypress-iot client not restarting after cell disconnects, causing IOT check-ins to stop

Version 1.5.0

Note: Downgrades from version 1.5.0 and above are not supported

Release Date

• May 23, 2023

Features and Improvements

• Added encryption of secure fields, such as passwords and secrets

• Added ability to reset password to factory settings from GUI

• Added an option to report only the changed keys in reports

• Improved the CLI options to better display configurations and hierarchy

Bug Fixes and Changes

• Fixed Radius fallback timeout causing slow GUI performance issue

• Fixed ISP-provided DNS not working issue

• Fixed NAT rules not applying immediately with config change issue

• Fixed Custom Firewall rules requiring a restart issue

• Fixed corner cases with CAN and Network data not displaying correctly in GUI

• Fixed network watchdog not restarting with cell config changes issue

• Improved WiFi functionality on CTM-500

• Improved IoT jobs management

• Improved validation for WiFi passwords

• Improved power management

• Standardized menu labels and titles across GUI

• Disabled SSH access by default for enhanced security

Version 1.4.2

Release Date

• Mar 30, 2023

Features and Improvements

• Added apps management

• Added WLAN bridge functionality

• Added ability for CAN parameters to lock onto specific ECU address

• Added remote logging

• Added ability to see logs in GUI

• Added button to send details to IoT for troubleshooting

• Added support for array config management via CLI

• Added dhcpdump utility to CLI

• Matched iwconfig output between WG7831 and FC21

Bug Fixes and Changes

• Fixed VLAN interfaces functionality

• Fixed DHCP Relay functionality

• Fixed Radius SSH authentication

• Fixed firewall rules ordering issues

• Fixed Passthrough static mode issues

• Improved custom firewall rule management

• Improved Radius error management in case of wrong configuration

• Removed default route option from eth0/1 settings

• Fixed spreader initialization issues

• Fixed the reading of AIN values over MODBUS

• Fixed no hysteresis issue on general-purpose inputs

• Fixed CTM-ONE Power Consumption in LPM

• Fixed the inability to disable IoT check-ins

• Fixed minor SNF issues

• [Other] Minor bug fixes

Version 1.4.1

Release Date

• Feb 3, 2023

Features and Improvements

• Added configuration migration from 1.3.x FW versions to 1.4.1

• Added Device ID for reporting and management

• Added spreader support to FW

• Added CPE monitoring

• Added Ping proxy feature

• Added Import/Export device configuration feature via web GUI or command line

• Added QXDM logging capability

• Ported RSSIMON command from Oxygen 3

• Improved web GUI

• Improved local web GUI session management

• Improved local password management

• Improved CTM-500 LED status

• Improved presentation of cellular information with LTE-A and 5G radios

• Added deprecated ciphers for compatibility support

• Added dual WiFi radio support for CTM-ONE

• Added support for Quectel RM520N-GL 5G radio

• Added support for Variscite v 3.1 SoM based on ADI Ethernet Phy

Bug Fixes

• Fixed Passthrough mode issues with firewall settings

• Fixed Static Routes not applied issue in Passthrough mode

• Fixed Custom firewall rules lost after reboot

• Fixed CTM-ONE LED indicators

• Fixed CTM-500 WiFi Client + AP functionality

• Fixed IPSec tunnel not starting up when enabled

• Fixed FC21 radio management in LPM

• Fixed failsafe configuration issues

• Fixed GUI access with Radius Authentication

• Fixed TAIP LN missing reserved 10 bytes

• Fixed SNF Count issues