Upon connecting to the modem's Wi-Fi network or wired connection, you will be prompted to change your password.
Firmware 1.3.x and earlier:
Login | Default value |
Username | admin |
Password | Chameleon |
Firmware 1.4.x and later:
Login | Default value |
Username | admin |
Password | see label |
You will see this screen after a successful login:
The left-most column contains expandable tree items for configuration.
Clicking the Edit button enables changes to the configuration to be made:
Cancel, restore to default, or save any changes made to a page.
Make sure to save changes to a page/tab before leaving and moving to another page/tab. After saving changes, you will see:
There is the possibility of an error pop-up when there is an issue with the configurations.
After clicking OK on the pop-up, the errors will display on the right in coloured boxes. Fix the validation errors first, then try saving again.
In the upper left of the browser. After saving, changes must be applied to take effect.
Confirm the changes:
After pressing the OK button, the following notice will appear in the upper right portion of the browser.
