The CTM-ONE can be powered directly from the vehicle's CAN Bus (OBDII/J1939). Simply connect the 8-pin terminal to the CAN Bus port on the CTM-ONE, and then connect the other end to the vehicle's diagnostic port.
CAN2.0B Bus
Molex Micro-Fit 3.0™ connector #:
Molex Part Number | Description |
43025-0800 | Receptacle housing |
43030 | Crimp Terminals 20-24 AWG |
The CAN interface is primarily utilized to connect to vehicle subsystems that support CAN communications. This includes small and light-duty vehicles manufactured in 2008 and later (ISO 15765-4), as well as heavy-duty vehicles that are compatible with J1939 protocol.
To interface with a vehicle's Engine Control Unit (ECU), an accessory OBDII or J1939 cable is necessary. The CTM-ONE can be powered directly from the CAN port, eliminating the need for additional cabling if the vehicle supports OBDII or J1939 communications.
The CTM-ONE supports both Medium and High-speed CAN interfaces, as well as Single Wire CAN.
