System status
Default dashboard showing general sub-categories
General
Connectivity summary
Power
Inputs
Engine diagnostics
Cell status
Cellular network parameters
Account information
Connectivity (detailed)
Signal Information
Network status
Information on networking settings
Network Interface status
wwan0
eth0
eth1
wlan0
wlan1
Network routes
ARP table
QoS status
Information on Quality of Service (if enabled)
Firewall status
Firewall rules
NAT table
Mangle table
VPN status
Information on IPsec
Log Viewer
Display of log data from 19 available categories
Only Syslog, Eventlog are available by default, other logging must be enabled in modem configuration (Configuration--> system--> Log file settings)
Syslog
Eventlog
Driver ID
Bluetooth and BLE
CAN0 and CAN1
Cellular connectivity
GPIO, I2C, LED
GPS, deadReckoning
IPsec VPN
Device firmware and config management
MODBUS RS232/RS485
Monitoring SNMP
Network interfaces, WiFi, firewall, DDNS
PAD RS232/RS485
Power management watchdog
Report delivery
Report triggers
System stats and data logger
Wireless LAN
Installer
Displays information related to vehicle installation and commissioning
Overview
Stats
Raw Vehicle CAN0/CAN1 data if available
Set odometer value
Set engine hours value
Diagnostics
Exposes common Linux commands for troubleshooting
Ping
Traceroute
Name lookup
Route lookup
TCP dump
Diagnostics output window