The CTM-500 can be configured via Ethernet or Wi-Fi, provided it is enabled. Depending on the initial configuration upon shipment, this step may be optional.
Ethernet
Connect one end of a standard Ethernet patch cable to any of the Ethernet ports on the CTM-500, and connect the other end to a LAN device, PC, or Ethernet peripheral. The Ethernet port supports 10/100/1000Base-T connection types and features auto MDI/MDIX support. This eliminates the need for an Ethernet crossover cable, whether the CTM-500 is connected to a router or directly to a computer.
Ethernet Port | Default IP (https) | Default Secondary IP | Username | Password |
|---|---|---|---|---|
ETH0 | 192.168.1.1 | 169.254.0.1 | admin | See label |
ETH1 | 192.168.2.1 | 169.254.0.129 | admin | See label |
Ethernet access can be disabled, but before doing so, ensure you have confirmed alternative access via other mechanisms, such as Cypress IOT.
Wi-Fi
Refer to the table below for access via username/password.
Interface | Technology | Default IP (https) | Default SSID | Key |
|---|---|---|---|---|
Radio 0WLAN0Radio 1 WLAN1 | 2.4 GHz 5/6 GHz | 192.168.3.1 192.168.4.1 | CypressCTM CypressCTM-5G | CypressAccess CypressAccess |
The CTM-500 supports two Wi-Fi interfaces: WLAN0 and WLAN1. Please refer to the CTM-ONE’s
...
Wi-Fi access can be disabled in the modem configuration if necessary.