The CTM-500 can be configured via Ethernet or Wi-Fi, provided it is enabled. Depending on the initial configuration upon shipment, this step may be optional.
Ethernet
Connect one end of a standard Ethernet patch cable to any of the Ethernet ports on the CTM-500, and connect the other end to a LAN device, PC, or Ethernet peripheral. The Ethernet port supports 10/100/1000Base-T connection types and features auto MDI/MDIX support. This eliminates the need for an Ethernet crossover cable, whether the CTM-500 is connected to a router or directly to a computer.
...
Ethernet access can be disabled, but before doing so, ensure you have confirmed alternative access via other mechanisms, such as Cypress IOT.
Wi-Fi
Refer to the table below for access via username/password.
...