Power to the CTM-ONE can be provided via AC/DC wall adaptor, wiring harness used when connecting to DC power source or Power Pin from OBDII/J1939 connection to vehicle ECU
Power for the CTM-ONE can be sourced through an AC/DC wall adapter for continuous operation. Alternatively, a DC power cable can connect to a DC power source within the range of 7-32 VDC.
Moreover, ignition line detection is supported, allowing the CTM-ONE to transition into standby/suspend modes for low-power scenarios.
Please refer to Appendix 1: Power for more detail.
Simply connect an appropriate power source to the 4-pin locking connector marked with the power icon 
.
DC Power Cable Part Numbers:
Length | Part Number |
|---|---|
3m (10ft) | 6954.2063 |
4m (13 ft) | 6954.2000 |
4.5m (15 ft) | 6954.2031 |
AC Wall Adaptor Part Number:
Item | Part Number |
|---|---|
CTM-ONE/500 AC wall adaptor | 6954.2019 |