Power to the CTM-ONE can be provided via AC/DC wall adaptor, wiring harness used when connecting to DC power source or Power Pin from OBDII/J1939 connection to vehicle ECU
Power for the CTM-ONE can be sourced through an AC/DC wall adapter for continuous operation. Alternatively, a DC power cable can A 3-wire DC power cable (comprising Ignition, Power, and Ground wires) is designed to connect to a DC power source within the with a voltage range of 76-32 36 VDC.Moreover, ignition line detection is supported, allowing
| Info |
|---|
Certain DC power accessories may come with a 4-wire bundle; in such cases, the 4th wire, typically coloured Green, can be disregarded and left unconnected.) |
Connecting the Ignition line enables the CTM-ONE to transition into standby/suspend modes for , facilitating low-power scenariosoperation.
Please refer to Appendix 1: Power for more detail.
Simply connect an appropriate power source to the 4-pin locking connector marked with the power icon 
.
DC Power Cable Part Numbers:
Length | Part Number |
|---|---|
3m (10ft) | 6954.2063 |
4m (13 ft) | 6954.2000 |
4.5m (15 ft) | 6954.2031 |
AC Wall Adaptor Part Number:
Item
Part Number
CTM-ONE/500 AC wall adaptor