There are two methods for modem control and configurationcontrolling and configuring the CTM-ONE modem. The two methods are local access via web browser and remote access via our device management platform: Cypress IOT.
Cypress IOT solution is a secure, multi-tenant platform that allows you to manage, deploy, and monitor devices in one place. As a scalable cloud-based application, you can configure devices, schedule tasks, and automate processes from your desktop, tablet, or smartphone.
Local Access via web browser
...
Remote Access via Cypress IOT
(interface)
Configuration of the CTM-ONE modem is accomplished via achieved through a heirarchical hierarchical web GUI interface. Cypress IOT offers provides the same heirarchical hierarchical interface to mimic replicate the experience of being locally connected locally to the device.
Local Access:
Local connection Connect locally to the modem via ethernet Ethernet cable or via WiFi Wi-Fi.
Available even when the modem does NOT have an active Cellular cellular connection or no SIM installed.
Local Access
...
Prerequisites:
Physical access to the CTM-ONE device.
Modem must be configured to accept connection connections via Local ethernet or WiFiConnecting local Ethernet or Wi-Fi.
The connecting computer must allow connections via the LAN/WLAN configuration on the modem.
Remote Access
...
via Cypress IOT
Devices regularily “check-in” regularly "check-in" to Cypress IOT at a user-configurable time intervalintervals, for example such as every 900 seconds or 15 minutes. Device management via Cypress IOT is a Near near real-time system for device management based on the programmed “checkcheck-in” in time above. After a device check-checks in to Cypress IOT the device , it will apply any configuration changes queued for the device via the configuration/command/jobs interface of Cypress IOT.
Remote Access
...
Prerequisites:
Users must have active Cypress IOT credentials,.
Modem must be able to communicate with Cypress IOT via cellular wireless connection.
The CTM-ONE will be ready for access and configuration approximimately 50 seconds after applying power.
...
.
...
The wireless gateway can be configured via Ethernet or Wi-Fi, provided it is enabled. Depending on the initial configuration upon shipment, this step may be optional. Additionally, all configurations can be remotely executed via the Cypress IOT device management platform.