Power for the CTM-ONE can be sourced through an AC/DC wall adapter for continuous operation. Alternatively, a DC power cable can A 3-wire DC power cable (comprising Ignition, Power, and Ground wires) is designed to connect to a DC power source within the with a voltage range of 76-32 36 VDC.Moreover, ignition line detection is supported, allowing
| Info |
|---|
Certain DC power accessories may come with a 4-wire bundle; in such cases, the 4th wire, typically coloured Green, can be disregarded and left unconnected.) |
Connecting the Ignition line enables the CTM-ONE to transition into standby/suspend modes for , facilitating low-power scenariosoperation.
Please refer to Copy of Appendix 1: Power for more detail.
Simply connect an appropriate power source to the 4-pin locking connector marked with the power icon 
.
DC Power Cable Part Numbers:
Length | Part Number |
|---|---|
3m (10ft) | 6954.2063 |
4m (13 ft) | 6954.2000 |
4.5m (15 ft) | 6954.2031 |
AC Wall Adaptor Part Number:
Item | Part Number |
|---|---|
CTM-ONE/500 AC wall adaptor | 6954.2019 |
Molex Micro-Fit 3.0™ connector #:
Molex Part Number | Description |
43025-0400 | Receptacle housing |
43030 | Crimp Terminals 20-24 AWG |
When a compatible vehicle interface is not available or not preferred, the CTM-ONE can be connected directly to a DC power supply using a DC power cable. Alternatively, you can opt for an AC Wall Plug adaptor, which facilitates quick and easy connection to standard 120V AC power.
...
Red
...
+7V to +32V DC
...
Black
...
0V return (GND)
...
White
...
Standby / Ignition (+V for operation, Off for standby)
...