The CTM -ONE is linked to a SCADA server, positioned where the SCADA server is located.
...
Required Configuration Settings
Setting Name | Description | Value |
Mode | Configure device to act as a Master Gateway | MODBUS Gateway Master |
WAN Encapsulation | Protocol used to communicate with remote Slave Gateway | TCP or RTU over UDP - Should match Slave Gateway |
Protocol | Protocol used to local talk to SCADA Server via RS-232/485 | ASCII or RTU - Must match SCADA Server |
Remote MODBUS Gateway Slaves
| Master gateway requires a list of ALL Slaves it is trying to communicate with. |
|