There are ten There are five LED indicators on the CTM-500 ONE wireless gateway.
...
LED | STATUS | DESCRIPTION | |
|---|---|---|---|
Power |  | (solid) normal powered operation | |
 | (flashing slowly) standby mode | ||
 | (off) Device has no power | GNSS ||
SIM |  | | (solid) valid position fixUsing SIM1 |
| (flashing slowly) no valid position fix | ||
| (off) GNSS disabled | ||
Wi-Fi  | | (solid) Wi-Fi enabled) slot 1 selected, SIM not detected | |
 | (solid) Using SIM2 | ||
 | (flashing) slot 2 selected, SIM not detected | ||
| (off) Wi-Fi Cellular connection disabled | MODE||
Cellular  | | (solid) pass through mode enabled ETH0 connected - good signal | |
| (flashing slowly) pass through mode enabled ETH1 | ||
| (off) pass through mode disabled | ||
) connected - poor signal | |||
| (solid) IPSEC ENABLED, and all tunnels CONNECTED not connected – good signal | ||
| (flashing slowly) IPSEC ENABLED, not all tunnels are CONNECTED | ||
| (off) IPSEC disabled | ||
 not connected – poor signal | |||
Wi-Fi (Access Point) | | (solid) cellular AP enabled – connected device | |
 | (flashing quickly) cellular connecting |  | (flashing slowly) cellular not connected/idle) AP enabled – no connected devices |
| (off) cellular connectivity AP disabled | ||
TECH |  | (solid) 5G | |
| (off) no cellular registration | ||
SIM 1 | | (solid) SIM1 selected and detected | |
| (flashing slowly) SIM1 selected, NOT detectedWi-Fi (Client) | | (solid) client enabled – connected to Access Point |
| (flashing) client enabled – not connected to Access Point | ||
| (off) SIM1 not selected | SIM 2Client disabled | |
GNSS  | | (solid) SIM2 selected and detectedvalid position fix | |
| (flashing slowly) SIM2 selected, NOT detected | ||
| (off) SIM2 not selected | ||
Cellular  |  | (solid or flashing) poor signal | |
 | (solid or flashing) good signal | ||
 | (solid or flashing) excellent signal |
Note: When cellular data is disabled, the following will be OFF: CONNECTION, TECH, SIM 1, SIM 2, and all three cellular lights.
Ethernet Port LEDs
...
) no valid position fix | |
| (solid) dead reckoning mode |
| Info |
|---|
If both the Wi-Fi client and the Wi-Fi access point are configured, the LED will display a combination of red and green lights. |