...
Power connector with ignition sense (4 pins)
7-32 VDC with Transient transient (spike) protection
Typical current draw 400mA is 500mA @ 12V
Standby /suspend mode 10mA @ 12VDC
2x Dual RJ-45 Gigabit Ethernet Ports
ETH0 (Ethernet 0) – supports PoE (802.3 at) with external battery accessory
ETH1 (Ethernet 1)
Engine Diagnostic Port (ECU) (8 pins)
Dual CAN interface
supports OBDII (ISO15765-4) and J1939 supported vehicles
General Purpose Input and Outputs (GPIO)/Serial/1-Wire® (16 pin). Please refer to [page] Appendix 2: GPIO/RS232/1-Wire Data Cable Connection for more detail
Inputs x 4
Outputs x 4
R-S232 (Receive/Transmit)
1-Wire® interface
Protected (fused) power output
USB-C Dual Role Portdual role port
Multiple RF connectors
Threaded SMA style for cellular GPS(GNSS)
4x antenna ports for cellullar (Refer to Appendix 5: Antenna cellular ports and RF ports mapping)
1 antenna port for GPS(GNSS)
RP-SMA style for Wi-Fi
2x antenna ports
ON/OFF Switch
The switch is used to turn the device on and off
Reset button
Used for rebooting or resetting the device to fail safe and factory configurations
Dual SIM card slot
Supports two 2FF (mini) SIM cards