...
...
The CTM-500 wireless gateway has two power modes:
Mode | Current @ 12V | Description | Mode change event |
|---|---|---|---|
Standby | 10 mA | Device is in low power mode.
| The device may spend most of its time in this mode. Various configurable triggers will transition the device out of this mode and into Operating Mode |
Operating | 400 mA | Device is operating, can communicate with peripherals, Serial, Ethernet, CAN, GPIO, GNSS
| The device will go back into standby mode when the ignition/standby signal is deactivated or upon expiry of the power ON timer if configured. |
Power management is controlled either by ignition or CAN Bus. By default, the CTM-500 remains powered on continuously when connected to external power with power management disabled.