There are two methods for modem control and configurationcontrolling and configuring the CTM-ONE modem:
Local Access via web browser
...
Remote Access via Cypress IOT
Configuration of the CTM-ONE modem is accomplished via achieved through a heirarchical hierarchical web GUI interface. Cypress IOT offers provides the same heirarchical hierarchical interface to mimic replicate the experience of being locally connected locally to the device.
Local Access:
Local connection Connect locally to the modem via ethernet Ethernet cable or via WiFi Wi-Fi.
Available when the modem does NOT have an active Cellular cellular connection or no SIM installed.
Local Access
...
Prerequisites:
Physical access to the CTM-ONE device.
Modem must be configured to accept connection connections via Local ethernet or WiFiConnecting local Ethernet or Wi-Fi.
The connecting computer must allow connections via the LAN/WLAN configuration on the modem.
Remote Access
...
via Cypress
...
Devices
...
regularly "check-in" to Cypress IOT at
...
user-configurable time
...
intervals,
...
such as every 900 seconds or 15 minutes.
...
Device management via Cypress IOT is a
...
near real-time system for device management based on the programmed
...
check-
...
in time
...
.
...
After a device
...
checks in to Cypress IOT
...
, it will apply any configuration changes queued for the device via the configuration/command/jobs interface of Cypress IOT.
Remote Access
...
Prerequisites:
Users must have active Cypress IOT credentials,.
Modem must be able to communicate with Cypress IOT via cellular wireless connection.
...