The CTM-ONE supports the option of internal antennas for cellular, Wi-Fi and GPS (GNSS). If the CTM-ONE is mounted with a clear view of the sky, a single connection point to the vehicle is all that is needed between the device and the OBDII or J1939 port of the vehicle. For other mounting scenarios where the CTM-ONE may be obstructed from a clear view of the sky, Cypress Solutions recommends the use :
Use of
...
external antennas if device is installed in vehicles (please refer to/wiki/spaces/CTMONE/pages/2397241347)
Draw power from vehicle CAN Bus (OBDII/J1939) - no other cabling required
For non-CAN vehicles, the device can be connected with a DC power cable for direct
connection
The most effective installation method we recommend is to connect the CTM-ONE to power via the vehicle’s OBDII or J1939, place the CTM-ONE on the dashboard, under the seat, on the window, or any other suitable position, and attach an external antenna to a window. This installation can be completed in roughly five minutes with the wires hidden.
...