Power for the CTM-ONE can be sourced through an AC/DC wall adapter for continuous operation. Alternatively, a DC power cable can connect to a DC power source within the range of 7-32 VDC.
Moreover, ignition line detection is supported, allowing the CTM-ONE to transition into standby/suspend modes for low-power scenarios.
Please refer to Copy of Appendix 1: Power for more detail.
Simply connect an appropriate power source to the 4-pin locking connector marked with the power icon 
.
DC Power Cable Part Numbers:
Length | Part Number |
|---|---|
3m (10ft) | 6954.2063 |
4m (13 ft) | 6954.2000 |
4.5m (15 ft) | 6954.2031 |
AC Wall Adaptor Part Number:
Item | Part Number |
|---|---|
CTM-ONE/500 AC wall adaptor | 6954.2019 |
Molex Micro-Fit 3.0™ connector #:
Molex Part Number | Description |
43025-0400 | Receptacle housing |
43030 | Crimp Terminals 20-24 AWG |
When a compatible vehicle interface is not available or not preferred, the CTM-ONE can be connected directly to a DC power supply using a DC power cable. Alternatively, you can opt for an AC Wall Plug adaptor, which facilitates quick and easy connection to standard 120V AC power.
Red | +7V to +32V DC |
Black | 0V return (GND) |
White | Standby / Ignition (+V for operation, Off for standby) |
A 5 Amp “slow-blow” fuse is recommended in the +V supply line.
...