The CTM-ONE can be powered directly from the vehicle's CAN Bus (OBDII/J1939). Simply connect the 8-pin terminal to the CAN Bus port on the CTM-ONE, and then connect the other end to the vehicle's diagnostic port.supports the option of internal antennas for cellular, Wi-Fi and GNSS. If the CTM-ONE is mounted with a clear view of the sky, a single connection point to the vehicle is all that is needed between the device and the OBDII or J1939 port of the vehicle. For other mounting scenarios where the CTM-ONE may be obstructed from a clear view of the sky, Cypress Solutions recommends the use of an external GNSS antenna.
The most effective installation method we recommend is to connect the CTM-ONE to power via the vehicle’s OBDII or J1939, place the CTM-ONE on the dashboard, under the seat, on the window, or any other suitable position, and attach an external antenna to a window. This installation can be completed in roughly 10-20 minutes with the wires hidden.
...
CAN2.0B Bus
Molex Micro-Fit 3.0™ connector #:
...