The CTM-500 includes ONE comes with a flexible , shock absorbing mounting bracket that has eight 5mm (3/16”) diameter featuring four 5mm mounting holes suitable for M5 or #10 screws.
...
Use either the outer or inner 4-hole mounting pattern to secure the bracket. Take care not to over-tighten.
...
| Note |
|---|
Exercise caution to avoid over-tightening these screws, as it may damage the bracket. |
Once the bracket is securely installed in the desired location, clip the CTM-ONE into the four tabs of the bracket.
...
The bracket can be used also serve as a drill template. This hole pattern matches the legacy Cypress Solutions devices (CTM-200 and Oxygen 3 Plus), therefore no extra holes are required.
...
guide template.
There are a total of four mounting holes, with a center-to-center distance of 1.75 inches (44.5 mm) by 3.75 inches (95.25 mm).
...
Optional Cable Covers
...