Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

 ‘SIM2’ slot is located at the top and ‘SIM1’ slot is located at the bottom.

CTM-500_Back_SIM_Transparent.png

SIM card insertion and removal

  1. Unlock the SIM card door by sliding it to the left until the door unlocks, then swing the door open.

  2. For single SIM card installation, insert the SIM card into either of the slots of the dual SIM holder. Ensure that the copper contact is facing upwards (chamfered corner to the front left).

  3. If applicable, the second SIM card can be inserted into the other slot of the dual SIM holder.

  4. Close the SIM door securely by sliding it to the right until a ‘click’ is heard.

Please refer to the video guide as an additional resource here.

...

SIM Removal Tool

The SIM removal tool is used to facilitate the removal of SIM cards. The tool is included with every CTM-500 device shipment. The opposite end of the SIM removal tool also serves as a main fuse removal tool.

...