1 Contents

Table of Contents

2 Overview

In many cases the vehicle odometer/engine hours cannot be obtained from the vehicle via connection to the vehicle CAN Bus. Odometer and engine hours can be entered manually to align with the vehicle calculated values.

3 Steps

CTM-ONE can accessed via LAN, Wi-Fi or remote cellular access. Access may be limited based on modem or network configuration.

Access via local Ethernet cable

Proceed to the vehicle with the CTM-ONE installed and connect the Ethernet cable from the laptop Ethernet port to the CTM-ONE Ethernet port.
Image Modified
The modem power LED must be solid green in order to access the modem. The LEDs for SIM, cellular, Wif-Fi and GNSS will be flashing or lit.
Image Modified
Open a browser on the laptop and enter the IP address: 192.168.1.1
With a successful connection you will be presented with the CTM-ONE dashboard and login prompt.
Image Modified
The default credentials are:
Username: admin
Password: Chameleon
Image ModifiedImage Modified
Select Installer from the left-side menu.
Image Modified
Locate the buttons at the bottom of the Installer page: Set Odometer Value and Set Engine Hours Value.
Image Modified
Odometer Value:
1. Press Set Odometer Value button.
2. NOTE: The value entered should be in kilometers, to convert from miles to kilometers multiply miles by 1.609
3. Enter an odometer value.
  Image Modified
4. Press the Update button.
  Image Modified
5. Press the OK button.
6. After completion a message will appear in the upper right corner.
  Image Modified
Engine Hours
1. Press Set Engine Hours Value button.
2. Enter an engine hours value.
  Image Modified
3. Press the Update button.
4. Confirm by pressing OK button.
5. After completion a message will appear in the upper right corner.