Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. Proceed to the vehicle with the CTM-ONE installed and connect the Ethernet cable from the laptop Ethernet port to the CTM-ONE Ethernet port.

  2. The modem power LED must be solid green in order to access the modem. The LEDs for SIM, cellular, Wif-Fi and GNSS will be flashing or lit.

  3. Open a browser on the laptop and enter the IP address: 192.168.1.1
    With a successful connection you will be presented with the CTM-ONE dashboard and login prompt.

  4. The default credentials are:
    Username: admin
    Password: Chameleon

    Image RemovedImage Added
  5. Select Firmware, Install Firmware from the left-side menu.

  6. Press the Choose file button and select the firmware file from the laptop file system.

  7. Press the Upload Firmware Image button.

  8. Press the Start Firmware Install button.

  9. Wait a few minutes while the firmware is installed and the modem restarts.

  10. Verify the the firmware was upgraded by reviewing the version displayed in the top right corner of the screen.

...